Start with what goes on the stage
The footprint comes from the performers and their gear, not the crowd. List everything that needs deck space: musicians, drum riser, DJ table, podium, LED wall, monitors, and a working lane for stagehands.
- DJ or solo act: the booth fits in 8′ × 8′. The rest of the stage is for lighting, video and presence.
- Corporate keynote or panel: depth matters more than width. Common sizes run from 12′ × 16′ to 16′ × 20′.
- Band of 3 to 6: 16′ × 20′ is a comfortable baseline. Bands of 7 to 10 want 20′ × 24′ up to 24′ × 32′.
- Multi-act shows: you need space to set the next act while the current one plays, so plan a deeper deck or rolling risers.
How acts map to our APEX mobile stages
Usable space is smaller than the deck once you add PA wings, an upstage LED wall and side-stage areas. Here is how we usually match acts to our hydraulic mobile stages:
- APEX 2016 (20′ × 16′): DJs, keynotes, community events and small bands.
- APEX 2420 (24′ × 20′): full bands, single-headliner shows, corporate events with a modest LED wall.
- APEX 3224 (32′ × 24′): multi-act concerts, large bands, bigger lighting and video.
- APEX 5040 GEN3 (50′ × 40′): festival main stages and touring productions with heavy roof loads and large LED walls.
Crowd size and stage height
Crowd size mostly drives height and screens, not deck size. A taller stage lets the back of a standing crowd see over the heads in front. Common rules of thumb:
- Seated corporate audiences: 2′ to 3′ is usually enough.
- Most concerts: about 4′.
- Large outdoor standing crowds: 5′ or more.
Our mobile stages sit in the concert range: the 2420 deck adjusts from about 39″ to 54″, the 3224 from about 46″ to 66″, and the 5040 GEN3 from roughly 4′ to 6′. Loosely, crowds under about 1,000 often fit a 2016 or 2420. Bigger crowds bring bigger PA, lighting and video, which moves you to the 3224 and up.
Sightlines, roof height and screens
- Wide crowds need a wider stage or side screens so people at the edges can see.
- Deep crowds need more height, and past a certain distance they need IMAG screens (live camera feeds on video).
- Roof trim height limits how tall your LED wall and lighting can be. The 2420 roof trims at about 12′ above the deck, the 3224 at about 16′.
- The mix position (front of house) needs a clear view of the whole stage, so keep it out of the way of towers and tents.
- Quick test: if people a few rows back cannot see a performer's legs and movement, the stage is too low.
Site and safety basics
A mobile stage needs firm, reasonably level ground, truck access, and room for the trailer and outriggers beyond the deck. The smaller APEX models set up in about 1 to 2 hours with a two-person crew. The 5040 GEN3 takes longer and a larger crew.
Outdoor stage roofs are engineered for specific wind and roof loads. The industry standard for these structures (ANSI E1.21) calls for a weather monitoring plan and action before a storm arrives. In South Florida we plan that call for every outdoor show. Most stages also need a permit, so build that into your timeline.
Send us your act, expected crowd and site, and we will recommend a stage and quote it for your event.
General guidance, not engineering or legal advice. Every site and permit is different; we confirm the details for your event when we quote it.
