The plain difference
A point-source speaker is a single box that spreads sound in a wide pattern, like most speakers on stands or stacked on a sub. A line array is a column of matched boxes, flown or stacked, that work together as one tall source. Each box is angled at a different part of the audience: the top boxes reach the back, the bottom boxes cover the front.
Neither is better in every case. The choice comes down to how many people you need to cover, how deep the audience area is, and whether you have somewhere safe to hang or stack the array.
How sound drops with distance
Sound from a point source spreads out like a ball, so level falls about 6 dB each time the distance doubles. That is a clearly noticeable drop. To be loud enough at the back, the front gets very loud.
A line array behaves more like a line close to it, with level dropping closer to 3 dB per doubling. That advantage only holds in the near field (roughly 50 to 60 feet for an average indoor array), and farther out the array acts like a point source again. The real benefit comes from aiming: a curved array with each box pointed at its own zone keeps level and tone much more even across the crowd. In one published example, a curved array cut the front-to-back level difference from about 18 dB to about 6 dB.
When point source makes sense
- Smaller crowds: under about 500 people, a good point-source system is almost always enough.
- Speech-focused events: keynotes, panels, ceremonies and awards in rooms where the audience is close to the stage.
- Short, wide areas: shallow rooms, patios and tents where the back row is not far from the front.
- Fast setups: point-source systems ground-stack quickly with no rigging, which helps on tight load-ins.
Between roughly 500 and 2,000 people either can work. Audience depth, the music, and how loud the show needs to be at the back decide it.
When a line array makes sense
Choose a line array when the crowd is large or deep, the show is music-driven, or you need the back of the field to sound like the front. Line arrays also let us aim sound at the audience and away from stages, buildings and neighbors. They need a rated rigging point (a stage roof or truss tower) or a stable ground stack, plus prediction software to set the angles.
As an authorized JBL Professional dealer, we scale the system to the event:
- JBL VRX (including the powered VRX932LAP): compact arrays for smaller venues and shows.
- JBL SRX900 series: powered line arrays for mid to large events.
- JBL VTX A12 and V25-II: touring-grade arrays for large concerts and festivals.
Why subwoofers matter
Subwoofers handle roughly 30 to 90 Hz, the kick drum and bass you feel in your chest. Main speakers cannot move enough air at those frequencies for a large crowd, so the low end needs its own boxes, whichever system you choose.
- Placement: subs stacked left and right interfere with each other, which leaves strong bass down the center and weak spots elsewhere. Careful placement and timing even it out.
- Cardioid arrays: arranging subs so bass cancels behind them cleans up the stage for performers and reduces spill toward neighbors.
- Genre: EDM and hip-hop need much more sub than a corporate keynote.
Tell us your crowd size, site layout and program, and we will design and quote the right sound system for your event.
General guidance, not engineering or legal advice. Every site and permit is different; we confirm the details for your event when we quote it.
